Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
9 8200-1929-03 A0
Note:You do not need to drill a cable hole on the wall as identified on the mounting template when
using the cable side entry slot.
4 Route the camera pigtail cable as per one of the options in step 3 and place the camera onto
the wall / ceiling and align the holes on the camera with the three holes on the wall / ceiling.
Figure 6 Cable hole on top of the camera body
Figure 7 Cable side entry slot
5 Insert the three tapping screws (1) (Figure 8) into the three holes on the camera body and
using the screw driver securely attach the camera to the wall / ceiling.