Installation Guide

93 8200-1929-03 A0
• Manually
• via NTP
The default setting is ‘Manually’.
7 If you select Manually in step 5:
a Select the Date (DD/MM/YYYY) using the drop-down menus.
b Select the Time (HH:MM:SS) using the drop-down menus.
8 If you select via NTP in step 5:
a Enter the NTP Server Name in the text box.
- End -
Health Monitor
The Health Monitor function provides visibility on the health status of popular device
parameters.Each parameter can be enabled or disabled. The refresh frequency of the health monitor
can be determined by selecting a duration from the Reporting Period drop-down menu.
Procedure 113 Configure Health Monitor Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Health Monitor from the System menu.
3 Select the Recording Period from the drop-down menu.
4 Select the corresponding check box to enable health monitoring on a parameter.
OR
Clear the corresponding check box to disable health monitoring on a parameter.
The default setting for all parameters is Enabled.
- End -
Logs
Information is provided on system logs created by the camera.
System Log
The system log gives the most recent messages from the unix/var/log/messages file. Information
will include the following:
• Messages about system behavior such as process startup/shutdown.
• Warnings about recoverable problems that processes encounter.
• Error messages where processes encounter problems they cannot fix; note that this does
not mean that the process will not continue to work, only that it encountered an issue it
could do nothing about.