Quick Start Guide

ManualsBrandsAmerican Dynamics ManualsNetworkIllustra Essentials 2MP Outdoor Network IR Bullet Camera, 2.7-13.5mm Lens, White

Table Of Contents

Table 2: Camera internal interface descriptions

Name

Description

Reset Button

Press and release to reboot the camera.

Signal LED (RED)

Indicates network data is being

transmitted.

Micro SD card slot

Insert a micro SD card into the slot for

recording and file storage.

Power LED (GREEN)

Indicates camera is powered on.

Default Button

Press the button for 6 seconds to restore

to the factory default settings.

Mounting the camera

A. Place the mounting template on the mounting surface and drill three

6mm (0.25’’) holes.

B. Insert the three plastic anchors (1) (Figure 3) into the three holes.

C. Place the camera on the mounting surface and align the three holes on

the camera with the three holes on the mounting surface.

D. Insert the three tapping screws (2) (Figure 3) into the three holes on the

camera body and using the screw driver securely attach the camera to

the wall / ceiling.

Security

Quick Start Guide

(8200-1929-02_A0)

Essential Gen4 2MP Fixed & Varifocal Bullet Cameras

In the box

 1 x Essentials Outdoor IR Bullet camera

 1 x Printed Quick Start Guide

 1 x Torx wrench

 3 x Plastic anchors

 3 x Tapping screws

 1 x Mounting template

 1 x T6 Wrench 130mm X 30mm (Varifocal Camera)

Installation tools

 Drill

 Screwdrivers

 Wire cutters

Quick reference

 Default IP: 192.168.1.168 (DHCP enabled)

 Default Username: admin

 Default Password: admin

 Power: PoE (IEEE 802.3af Class 3)

Figure 1: Camera parts and connections

Figure 1

Table 1: Camera parts and connections descriptions

Name

Description

DC 12V Port

For powering on the camera through the

DC12V power source.

RJ-45 Ethernet / PoE

Port

Connect an Ethernet cable terminated

with RJ-45 connector to the PoE RJ-45

port for both power supply and network

connectivity purposes simultaneously.

Mounting Bracket

To mount the camera onto different

environments, the mounting bracket is

designed with three axes for flexible

adjustment.

Internal Interface Cover

Use a screwdriver to loosen the 2 screws

and open the cover to access the internal

interfaces including the “RESET” and

“DEFAULT” buttons, “Micro SD Card

Slot”, and LED’s.

Protection Shield Hood

For minimizing the effects of rain and

sunlight on image quality.

Figure 2: Camera internal interface and descriptions

Figure 2

Mounting the camera (continued)

Figure 3

Summary of content (2 pages)

PAGE 1
Table 1: Camera parts and connections descriptions Security Quick Start Guide Name A DC 12V Port B RJ-45 Ethernet / PoE Port (8200-1929-02_A0) Essential Gen4 2MP Fixed & Varifocal Bullet Cameras In the box        1 x Essentials Outdoor IR Bullet camera 1 x Printed Quick Start Guide 1 x Torx wrench 3 x Plastic anchors 3 x Tapping screws 1 x Mounting template 1 x T6 Wrench 130mm X 30mm (Varifocal Camera) Mounting Bracket Internal Interface Cover Protection Shield Hood Drill Screwdrivers Wir
PAGE 2
Wiring the camera Adjusting the camera position You can run the cable through the mounting bracket or you can run the cable through the cable side entry on the mounting bracket. A. When mounting the camera, pass the cable through the mounting bracket and then through the:  hole on the mounting surface (1) (Figure 4). OR  the cable side entry on the mounting bracket (1) (Figure 5). The camera has three axes to adjust the field of view for different Applications (Figure 6).