Product data

VideoEdge NVR 4.1 Release Notes

8200-2735-07 D0

Appendix C – AD Fixed IP Cameras (Illustra 400)

Supported Models

 Model: Illustra 400 Fix Cameras (Box, Bullet, Mini-Dome)

Supported Firmware

 Firmware: Must be V2.20 or higher

Supported Key Functions

 Video Streaming Single, Dual

 Video Codec H.264 and MJPEG

 Audio Streaming G.711 ulaw and G.726, single stream only

 Dry Contact Events Single. Camera is polled for dry contact event at 100ms interval

 Query Device

 Device Reboot

Required Network Ports

 Port 80 is for HTTP

 Port 554 is for RTSP

Default Username and Password

 Username: admin

 Password: 9999

Limitations

 The camera will reboot when changing codec (audio or video), resolution, frame rate, key

frame interval, video quality, audio volume, enable audio / audioin and any other audio / video

properties. The reboots will take about 20 to 30 seconds.

 All audio and video streams will be lost when the camera reboots. All audio and video

streams will then need to be re-established.

 When the camera is rebooting, video and audio properties may not be available to get / set

new value.

 Dual Video streaming:

a. Stream (profile) 1 is designated for H.264 and Stream (profile) 2 is designated for

MJPEG.

b. Due to camera internal resource contention, both streams must have the same

resolution.

c. Dual H.264 and Dual MJPEG video streams are not supported in this release.

 To achieve optimal H.264 Motion Detection results, the recommended settings are:

a. Stream 1 is H.264, 30fps, D1 or D2 resolution, default quality

b. Stream 2 is MJPEG, 7 fps, CIF, default quality