Product data

VideoEdge NVR 4.1 Release Notes
43
8200-2735-07 D0
Camera Serial Number
 NVR will use the camera‟s MAC address as the camera serial number.
Supported Key Functions
 Video Streaming Single and Dual
 Video Codec MJPEG, MPEG4 and H.264
 Audio Streaming Audio codec supported is dependent on the camera model
 PTZ Applies to analog cameras that have mechanical Pan, Tilt, and Optical
Zoom
 Dry Contact Events HTTP server push functionality is available for increase in efficiency and
speed of obtaining dry contact events.
Required Network Ports
 Port 80 is for HTTP
 Port 554 is for RTSP
Default Username and Password
 Username: admin
 Password: admin
Limitations
 Find devices is not supported.
 Power-off devices is not supported.
 Get device log is not supported.
 Reset to factory default is not supported.
 Digital PTZ on cameras that support internal digital PTZ is not supported.
 Relative Iris is not supported, which means victor client won‟t be able to adjust the Iris.
However the absolute Iris adjustment is available through NVR or Camera web page.
 Digital PTZ are not supported.
 SNC-CS50N/P, DF50N/P, SNC-DF80N/P, DF85N/P, RX530N/P, SNC-RX550N/P and
RX570N/P Due to SONY camera performance limitation on H.264 stream the camera can
support only 1 video stream.
 SNC-CM120, SNC-CS20, SNC-DM110, SNC-DM160, SNC-DS10 and SNC-DS60 Due to the
camera performance limitation on the RTSP/RTP protocol the camera can support only 1
video stream, either MJPEG or MPEG4.
 Due to SONY performance limitation with their 5th generation cameras, Dual Video
Streaming might not deliver the requested FPS or resolution for both streams.
 SONY 5th generation cameras set with motion-detection using MJPEG or MPEG4 will
present the limitation that if H.264 has been used for the primary stream, it cannot be used
for the secondary.
 SONY 5th generation cameras when primary stream is set to 640x480 or greater then pick a
smaller resolution for the secondary, generally not more than 640x480.