Specifications

50 Installation and Operation Guide
Description of function keys:
Mode:
Choose the video format from “H.264” or “JPEG”. It can be JPEG or
H.264. In JPEG mode, the video frames are independent. However,
H.264 consumes much less network bandwidth than JPEG.
Frame size:
This option allows the user to choose the video resolution of the
camera between “896x720“, “720x480”, “352x240” and “176x120”.
Maximum frame rate:
Click on the drop-down list to choose the frame rates of “30FPS”
(PAL: “25FPS”), “15FPS”, “7FPS”, “4FPS” and “1FPS”.
Video quality:
Selects the image quality level of JPEG images captured from
“Highest”, “High”, “Medium”, “Low” and “Lowest”.
Selects the image quality level of H.264 images captured from
“Constant bit” (4M, 2M, 1M, 512K, 256K, 200K, 128K and 64K) or
“Fixed Quality“ (Highest, High, Medium, Low and Lowest).
Intra Frame Period:
In the H.264 mode, if there is little motion and most of the video
content does not change from frame to frame, the H.264 encoding
can compress the video by intra-frame way to keep the quality from
loss.
You can set the desired time period to use intra-frame compression.
Audio Settings:
You can use the option to switch the external microphone on/off or
adjust the volume.
NOTE: The default Audio Setting of the IP Box Camera is off
(disabled).
Encoding:
Click on the drop-down list to choose the audio encoding of “G.711”
and “G.726”. G.726 offers quality nearly identical to G.711, but it uses
only half the bandwidth.
Audio Mechanism Setting:
Check to activate this function. Then select MIC or Line In.
NOTE: The option of 26dB is for long-distance audio receiving,
especially longer than 3 meters.
Enable audio out:
Check to activate this function. Then set the Audio out volume level.