Specifications

Installation and Operation Guide
75
Server:
Click on the Add button in the Server column to enter the “Server” setting page.
Figure 5.35 Server
1. Enter the Server name, the unique name for a server. There are four kinds of servers
supported. They are email server, FTP server, HTTP server and network storage.
2. Set the details of the Email. "Sender email address": The email address of the sender.
"Recipient email address": The email address of the recipient.
3. Set the details of the FTP. "Remote folder name": An authorized folder on the external FTP
server. The string must conform to that of the external FTP server. Some FTP servers cannot
accept a preceding slash symbol before the path without virtual path mapping. Refer to the
instructions for the external FTP server for details. The folder privilege must be open for
uploading. "Passive Mode": Check it to enable the passive mode in transmission.
4. Set the details of the Network storage. Only one network storage is supported. "Network
storage location": The path to upload the media. "Workgroup": The workgroup for network
storage.
5. Click on the SD card to activate the function. Use the SD card for recording media.
6. Click on “Submit” to save or click on “Don’t Submit” to go back to the Event main page.