Specifications

Installation and Operation Guide
89
Question 4:
How do I set up the motion detection area and its sensitivity?
◇ Set up the motion detection
1. Activate the Web browser and key in the camera IP Address.
2. SETUP Application button Motion Detection button.
3. Select “Enable Video Motion”.
4. Set up the target zone you want and setup the Sensitivity and Percentage.
4. Click the Submit button to submit the setting.
5. When any person or object moves within the target zone under a setting, the Motion
Detection will display the response signal in the Live Video and Video Out.
Question 5:
How do I use the DynDNS to connect the IP camera by using its Sub Hostname via the
intranet?
◇ Set the DDNS function
1. Click the Network button in the Setup page.
2. Click the Dynamic DNS button on the left side of the page to enter the “Dynamic DNS”
setting page.
3. Check on the “Enable DDNS” Function to activate it.
4. Enter the DDNS Host Name, DDNS Account and DDNS Password which you created in the
www.dyndns.com website.
5. Click on the Submit button to submit the setting.
NOTE: Please refer to the APPENDIX B for more details.
◇ Set the PPPoE function
1. Click the Network button in the Setup page.
2. Click the PPPoE button on the left side of the page to enter the “PPPoE” setting page.