Specifications

96 Installation and Operation Guide
Figure A-3
Step 3: Click the Protocols tab in the Network Connections dialog box. See Figure A-4.
Figure A-4
Step 4: When the Local Area Connection Properties dialog box shows up, choose Internet
Protocol (TCP/IP) and click Properties. See Figure A-5.
Figure A-5
Step 5: In the Internet Protocol(TCP/IP) Properties dialog box, choose Use the following IP
Address to indicate that you do not wish to use DHCP, and assign IP Address
192.168.1.200 with Subnet mask 255.255.255.0.
Click OK when you finish it. See Figure A-6.