User guide

Illustra Flex 1MP & 3MP Bullet

Edit Profile

This unit offers two choices of video codecs for real-time viewing: H.264 or M-JPEG. Click codec to change

desired setting as below. By default, there are 6 compression profiles can be chose for respective resolution,

frame rate, and picture quality as required. Be sure to click save to keep the desired setting.

ABLE 3-1: EDIT PROFILE OPTIONS

(ADC

I800F-B521)

Item Option Description

Video Codec

M-JPEG/H.264 Set a default codec

Resolution

2048×1536

1080P(1920×1080)

SXGA(1280×960)

720P(1280×720)

SVGA(800×600)

D1(720×480 / 720x576)

4CIF(704×480 / 704x576)

VGA(640×480)

CIF(352×240 / 352x288)

While 2048×1536 is the highest resolution, CIF is the lowest

resolution.

Frame Rate

NTSC: 1~30

Frame rate is based on second.

NTSC: H.264 or M-JPEG single stream: 2048×1536; H. 264

single stream:2304×1296, 1080P(1920×1080)@30fps,

3M(2048×1536)@15fps

Bit Rate Mode

Variable Bit Rate/Constant Bit Rate

Choose the bit rate control selection based on user

requirements. A higher bit rate will use higher network

bandwidth

GOP

1-64

Select the GOP (Group of pictures) number from 1 to 64.

Recovery of the lost frames will be more difficult as the

number gets bigger; on the contrary, it will increase the bite

rate obviously and aggravate the network bandwidth. The

default value is 30. GOP will be differed by frame rate setting.