User guide

Illustra Flex 1MP & 3MP Bullet
34
3.2.2 Network Settings
Below explains how to configure a wired network connection for the unit.
FIGURE 3-23: NETWORK SETTINGS
 Camera Name: Enter a desired camera name or use the default name.
 DHCP: If selected, the unit will automatically obtain an available dynamic IP address from the DHCP
server each time it connects to the LAN.
 IP Address: Manually input IP address when DHCP off selected.
 Subnet Mask: Please use default number: 255.255.255.0. If the subnet mask is not properly configured,
the unit may not be able to communicate with other devices on the network.
 Default Gateway: Leave blank as default setting. It is not necessary to enter Default Gateway if it is not
used. Ask your Network Administrator for Default Gateway information.
 Primary DNS: (same as above)
 Secondary DNS: (same as above)
 OSD: When set to “ON”, the camera name can be show on the screen.