User guide

Illustra Flex 1MP & 3MP Bullet
39
DST
Time Zone: Select the time difference between Greenwich Mean Time and where the unit is located.
Daylight Saving: Tick “Daylight Saving” to enable the daylight-saving function if in a daylight saving time zone
(effective in NTP mode only).
FIGURE 3-33: DST SETTINGS
Note
Please click “Save” button to save your settings. Users can also click “Reset to Default” to set
all the data and options back to defaults.
3.2.3.2 User Management
Press the item-user management on setting menu, and system password and language (only including
English) can be setup. The default setting for system Admin ID, password, and language are admin, admin,
and English respectively; however, desired Admin ID and password can be entered at this field.
FIGURE 3-34: ADMIN SETTINGS
Besides administrator, guests can access the unit under authorization from system administrator by privilege
controller. User1~5 are allowed to review the live picture only. No operation will be enforced without any
authorization. The default login name and password of guests are “user 1” (user+ 1~5) and “0000”; however,
desired login name and password of guests may be altered like those of administrator’s.
F
IGURE 3-35: GUEST SETTINGS
Caution
The login ID and Password is supported max 32 characters. Only space key is invalid.
Finally, click Save to keep the settings.