Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 111
Procedure 137 Configure FTP Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select FTP from the Network menu.
3 Select the Enable check box to enable FTP.
OR
Deselect the Enable check box to disable FTP.
The default setting is ‘Enabled’.
Note:When in Enhanced Security mode, enabling FTP requires the admin account
password.
4 If required, select the Secure FTP checkbox.
The default setting is ‘Disabled’.
5 Enter the IP address of the FTP Server in the FTP Server text box.
6 Enter the FTP port in the FTP Port text box.
The default setting is 21.
7 Enter the FTP username in the Username text box.
8 Enter the FTP password in the Password text box.
9 Enter the FTP upload path in the Upload Path text box.
Note:When entering the upload path the following format should be used '//<name
of ftp directory>/<folder>'
- End -
File Transfer Rate
You can limit the File Transfer Rate and assign a max transfer rate assigned to manage the amount
of FTP bandwidth used.
Procedure 138 Configure the FTP Transfer Rate
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select FTP from the Network menu.
3 Select the Limit Transfer Rate check box to limit the FTP transfer rate.
OR
Clear the Limit Transfer Rate check box to disable limited FTP transfer.
The default setting is ‘Enabled’.
4 Enter the Max Transfer Rate in the Max Transfer Rate (Kbps) textbox.
The default setting is 50.
- End -