Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
112 8200-2007-08 A0
Test FTP Settings
Test the FTP settings that have been configured correctly.
Procedure 139 Test the FTP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select FTP from the Network menu.
3 Select the FTP tab.
4 Select Test. A sample text file will be sent to the specified FTP destination to confirm that
FTP settings are correct.
- End -
SMTP
Configure the SMTP settings to allow e-mail alerts to be sent from the camera when an analytic alert
is triggered.
Note:SMTP settings must be configured to enable email alerts when using analytics.
Procedure 140 Configure SMTP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SMTP from the Network menu.
The SMTP tab displays.
3 Check the Enable SMTP check box to enable SMTP. Text boxes on the tab become
available for entry.
Note:When in Enhanced Security mode, enabling SMTP requires the admin
account password.
4 Enter the IP Address of the mail server in the Mail Server text box.
5 Enter the server port in the Server Port text box.
The default setting is ‘25’.
6 Enter the from email address in the From Address text box.
7 Enter the email address to send email alerts to in the Send Email to text box.
8 Select the Use authentication to log on to server check box to allow authentication
details to be entered.
OR
Clear the Use authentication to log on to server to disable authentication.
The default setting is ‘Disabled’.
9 If ‘Use authentication to log on to server’ check box has been selected:
a Enter the username for the SMTP account in the Username text box.