Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
114 8200-2007-08 A0
Heartbeat
Procedure 142 Enable/Disable Heartbeat
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SNMP from the Network menu.
3 Select the Heartbeat tab.
4 Select the Enable Heartbeat check box to enable Heartbeat.
OR
Deselect the Enable Heartbeat check box to disable Heartbeat.
The default setting is ‘Disabled’.
- End -
Procedure 143 Enable select Heartbeat intervals
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SNMP from the Network menu.
3 Select the Heartbeat tab.
4 Select the Enable Heartbeat check box to enable Heartbeat.
5 Use the slider bar to select the Heartbeat Interval (secs).
6 The default setting is ‘60' seconds. The seconds range from 5 to 500.
- End -
CIFS
The CIFS feature permits files generated from the camera such as alarm related video to be directed
to network attached file storage via the Common Internet File System protocol. This supplements
existing distribution methods such as FTP, SFTP and email.
Procedure 144 Configure CIFS Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select CIFS from the Network menu.
3 Select the Enable check box to enable CIFS.
OR
Deselect the Enable check box to disable CIFS.
The default setting is ‘Disabled’.
Note:When in Enhanced Security mode, enabling CIFS requires the admin account
password.