Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
116 8200-2007-08 A0
Procedure 146 Configure Dynamic DNS
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Dynamic DNS from the Network menu.
3 Select the Service Enable check box to enable Dynamic DNS.
OR
Deselect Service Enable check box to disable Dynamic DNS.
The default setting is ‘Disabled’.
4 If Service Enable has been enabled:
a Enter the Camera Alias in the text box.
b Select a Service Provider from the drop-down list:
• dyndns.org
• easydns.com
• no-ip.com
• zerigo.com
• dynsip.org
• tzo.com
c Enter a Username in the text box.
d Enter a Password in the text box.
e Enter Service Data in the text box.
5 Select Apply to save the settings.
- End -
SIP
The Session Initiation Protocol (SIP) feature enables the camera to be configured as a SIP User
Agent that can register with a SIP server to make and receive audio calls to another SIP device, for
example, a SIP IP phone or softphone. The camera can operate as a SIP phone if it is equipped with
an external microphone and speaker. The camera can also be configured to monitor the audio from a
SIP call and make this available as an RTSP/RTP stream.
Note:Only the the SIP incoming audio is recorded in the RTSP stream.
Procedure 147 Enable/Disable SIP
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SIP from the Network menu.
3 Check the Enabled check box to enable SIP
OR
Clear the Enabled check box to disable SIP.