Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 117
The default setting is 'Disabled'.
4 Click Apply to save your settings.
Note:After you enable SIP, the camera reboots automatically.
- End -
Procedure 148 Configure the SIP Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SIP from the Network menu.
3 Check the Enabled check box to enable SIP.
4 Enter the IP address of the SIP Server in the Domain text box.
5 Enter the SIP account username in the Username text box.
6 Enter the SIP account password in the Password text box.
7 From the Audio Source dropdown menu, select the Audio Source for calls:
• Mic - only external microphones are currently supported.
8 From the Audio Output dropdown menu, select an audio output:
• Speaker - the SIP call audio is output to the external speaker.
• Network Stream - the SIP call audio can be streamed using an RTSP
Audio Stream.
9 Click Apply to save your settings.
Note:After you enable SIP, the camera reboots automatically.
- End -
Procedure 149 Place a SIP call
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SIP from the Network menu.
3 Enter the SIP Extension number in the Extension text box.
4 Click Dial to activate the call.
5 Click Hang up to end the call.
Note:The Status Log, located below the Dial and Hang up buttons, reports the
status of SIP connection and active calls.
- End -
Wi-Fi
The Wi-Fi option allows wireless configuration of the camera at the point of install in conjunction with
the Illustra Tools app (Illustra Wi-Fi dongle required).