Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
118 8200-2007-08 A0
Note:Illustra Tools App available on Android and IOS App stores.
Procedure 150 Enable wireless configuration of the camera
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Wi-Fi from the Network menu.
3 Check the Enable USB check box to enable WIFI configuration.
Note:The Illustra Tools app can now connect to the camera using the IP address
10.181.182.1 or by scanning the QR code shown or on the product packaging.
Note:USB will be enabled for 1 hour after the camera is powered from a factory
reset. After 1hr, Wi-Fi will be disabled and will require a factory reset to re-enable.
Illustra Wi-Fi dongle must inserted in camera for Wi-Fi access.
- End -