Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 122
Procedure 155 Restore Camera from Backup
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Maintenance from the System menu.
3 Select the Backup/Restore tab.
4 Select Browse.
The Choose file to Upload dialog displays.
5 Navigate to the location where the firmware file has been saved.
6 Select the firmware file then select the Open button.
7 Select Upload.
The file transfer begins. Do not disconnect power to the camera during the upgrade process.
The camera restarts automatically after the updates have been completed, this can take
from 1 to 10 minutes. The Log in page displays.
- End -
Cloudvue
The Cloudvue feature implements Illustra Cameras to Cloud (C2C) from Cloudvue to provide a
secure, scalable, cloud-based storage solution. Before you enable this feature, you need to install the
mobile application. You can download the app from either the iOS App Store or the Google Play Store
and then you can complete the registration using the app.
Procedure 156 Enabling Cloudvue integration
Note:If a Cloudvue server is not setup when enabling the Cloudvue feature then the camera may
become inaccessible.
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Maintenance from the System menu.
3 Select the Cloudvue tab.
4 Select Apply.
5 Enter an administrator password to validate the request.
• If the camera detects an Internet connection, it continues with th Cloud-
vue integration request. If an Internet connection is not detected an
error displays and the request is rejected.
Note:If an Internet connection is detected, a factory reset begins. This clears all previous user
defined configurations including user management settings.
The camera boots in Cloudvue mode and is only accessible using HTTPS.
The password changes to a string of characters determined by the Cloudvue.
6 Refer to Cloudvue documentation and follow the procedure to add a camera to regain
access.