Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 124
The default setting is ‘Manually’.
7 If you select Manually in step 5:
c Select the Date (DD/MM/YYYY) using the drop-down menus.
d Select the Time (HH:MM:SS) using the drop-down menus.
8 If you select via NTP in step 5:
a Enter the NTP Server Name in the text box.
- End -
Audio
You can configure the audio input, output, upload audio and stored audio clips, as well as configure
Audio Video Synchronization on this tab.
Procedure 159 Configure Audio Input
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Audio from the System menu. The Audio Input tab displays.
3 Select the Input Enable check box to enable the audio input settings.
Or
Clear the Input Enable check box to disable audio input settings.
The default setting is ‘Disabled’.
4 Use the slider bar to select the Input Volume.
Values range from 1 to 100.
The default setting is 72.
- End -
Procedure 160 Configuring Audio Output
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Audio from the System menu.
3 Select the Output Enable check box to enable the audio output settings.
Or
Deselect the Output Enable check box to disable audio input settings.
The default setting is ‘Disabled’.
4 If Output Enable has been enabled, use the slider bar to select the Output Volume.
Values range from 1 to 100.
The default setting is 50.
- End -