Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 126
Select OK to confirm the upload.
Or
Select Cancel.
- End -
Procedure 163 Delete a Stored Audio file
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Audio from the System menu.
3 Select the Audio Clips tab.
4 Select the corresponding Delete check box to mark the audio file for deletion.
Or
Deselect the corresponding Delete check box to keep the audio file.
5 Select the Select All check box to mark all audio files for deletion.
6 Select Delete to delete the selected audio files.
You will be prompted to confirm the deletion.
7 Select OK to confirm the deletion.
Or
Select Cancel.
- End -
HDMI Video
The camera can output to a HDMI monitor through the micro HDMI cable port.
Procedure 164 Enable or disable HDMI Video
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select HDMI Video from the System menu.
3 Select the Enable HDMI check box to enable HDMI video.
Or
Deselect the Enable HDMI check box to enable HDMI video.
The default setting is ‘Disabled’.
- End -
Health Monitor
The Health Monitor function provides visibility on the health status of popular device
parameters.Each parameter can be enabled or disabled. The refresh frequency of the health monitor