Installation Guide

127 8200-2007-08 A0
can be determined by selecting a duration from the Reporting Period drop-down menu.
Procedure 165 Configure Health Monitor Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Health Monitor from the System menu.
3 Select the Recording Period from the drop-down menu.
4 Select the corresponding check box to enable health monitoring on a parameter.
OR
Clear the corresponding check box to disable health monitoring on a parameter.
The default setting for all parameters is Enabled.
- End -
Logs
Information is provided on system and boot logs created by the camera.
System Log
The system log gives the most recent messages from the unix/var/log/messages file. Information
will include the following:
• Messages about system behavior such as process startup/shutdown.
• Warnings about recoverable problems that processes encounter.
• Error messages where processes encounter problems they cannot fix; note that this does
not mean that the process will not continue to work, only that it encountered an issue it
could do nothing about.
Procedure 166 Display System Log
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Logs from the System menu.
The System Log tab displays.
3 Select Refresh to refresh the log for the most up-to-date information.
- End -