Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
13 8200-2007-08 A0
Procedure 2 Installing the camera into a recess ceiling
Step Action
1 Hold the guide pattern sticker up to the ceiling (1) (Figure 9) and cut out a 125mm hole.
2 Use the T20 security key to remove the three screws on the dome cover (2) (Figure 3).
3 Use a screw driver to remove the safety lanyard screw that is connecting the dome cover to
the camera.
Note:The dome cover is now completely disconnected from the camera.
4 Place the camera cables through the hole in the ceiling and the metal cover (2) (Figure 9).
Figure 9 Installing the camera into a ceiling
5 Connect the cables to their respective ports on the camera.
6 Align the two screws on the metal cover (1) (Figure 10) with the two holes on the camera and
use a screw driver to securely attach the metal cover to the camera.