Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
134 8200-2007-08 A0
• If SD card Encryption was disabled before reset, the SD card will show
as unmounted and Encryption will be enabled. SD card will need to be
formatted before it can be mounted by the camera.
- End -
Record Settings
Select which video stream to use for alarm video and configure pre and post event durations for the
playable video clip. The camera can record video generated from MD, face detection and DIO
events.
Procedure 178 Configure Record Settings
Step Action
1 Select Setup on the Web User Interface Banner to display the setup menus.
2 Select Record Settings from the Edge Recording menu.
3 Select Enable Record to allow the camera to create a playable video clip.
OR
Deselect Enable Record to disable the feature.
4 If Enable Record has been enabled:
a Select the required video stream from the Video drop-down menu.
Refer to Procedure 5-1 Configure the Video Stream Settings.
b Select the Pre Event (secs) in seconds from the drop-down menu. Values range from 0
to 10.
The default setting is 5 seconds.
c Select the Post Event (secs) in seconds from the drop-down menu. Values range from 0
to 10.
The default setting is 5 seconds.
5 Select Apply to save.
- End -
Offline Record Settings
When you configure the Offline Record Settings feature and once it detects a loss of connection with
the recorder, it sends the video stream to the Micro SD card within the unit. This satisfies the loss of
video and continues recording. Once the recorder is back online the camera initiates sending
recorded video from the Micro SD card to the recorder. The maximum time recording during the
outage depends on the Micro SD card and the recorded stream you selected. If the Micro SD reaches
full capacity, it deletes video from earliest recording to latest recording. This feature integrates with
the VE NVR 5.0 Trickle Stor.
Procedure 179 Configure Offline Recording Settings
Step Action
1 Select Setup on the Web User Interface Banner to display the setup menus.
2 Select Record Settings from the Edge Recording menu.
3 Select the Offline Record Settings tab.