Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 14
Figure 10 Metal cover attached to the camera
7 Push the camera cable back into the hole in the ceiling and hold the camera up to the hole in
the ceiling.
8 Use a cross screw driver and turn both captive screws (1) (Figure 11) on the camera
clockwise to extend out the locking arms (2) (Figure 11), then rotate the two captive screws
anti-clockwise until the locking arms sit securely to the ceiling.
Figure 11 Ceiling locking springs
9 Adjust the camera lens position as follows. See Figure 12.