Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 18
Figure 14 Installing the camera onto a surface with a recessed junction box
5 See steps 8 to 14 in the Installing the camera onto a wall or ceiling procedure to complete the
installation.
- End -
Procedure 5 Installing the camera onto a surface with a junction box
Step Action
1 See steps 1, 2, and 3 in the Installing the camera onto a wall or ceiling procedure.
2 Insert the four screws anchors onto the four holes on the junction box (1) (Figure 15).
3 Hold the camera bottom case (2) (Figure 15) up to the junction box and align the four holes
on the camera bottom case with the four holes on the junction box
4 Insert the four TP 32mm screws (3) (Figure 15) and securely attach the bottom case to the
junction box.