Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
34 8200-2007-08 A0
a If you select VBR, VBR Quality is enabled. Select the required VBR Quality from the
drop-down menu. The default setting is High.
• Highest
• High
• Medium
• Low
• Lowest
OR
b If you select CBR , Bit Rate is enabled. Use the slider bar to select the Bit Rate. The
default setting is 1000.
OR
c If you select CVBR, Max Bit Rate is enabled. Use the slider bar to select the Max Bit
Rate. The default setting is 8000.
- End -
Procedure 22 Configuring IntelliZip Max GOP
This feature only applies to H264+ IntelliZip or H265+ IntelliZip codec.
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Video Stream Settings tab in the Basic Configuration menu.
3 Use the slider bar to select the Max GOP range. Range available is 1-180.
- End -
Picture Basic
You can configure the Picture rotation, zoom / focus and exposure.
Picture Rotation
Configure the orientation and corridor mode settings. Both settings are optional.
Focus/Zoom
The Focus is manually configured on initial setup. The One Touch button can be used to
automatically focus the area of view. The plus and minus arrows are used to manually fine tune the
image. The Zoom slider bar is used to manually zoom in and out to manually configure to picture. The
table below describes the features supported by each camera.
Exposure
Configure the exposure settings for the camera.
Procedure 23 Configure Orientation Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.