Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 35
3 Select the required Orientation setting:
• Mirror
• Flip
Mirror and Flip settings are not selected by default. The video pane updates to display the
new settings.
Note:When wall mounting the camera you should select Flip to correct the lens
orientation.
- End -
Corridor Mode
Provides a better perspective when viewing a long corridor.
Procedure 24 Configure Corridor Mode Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.
3 Select the Play button to start the video stream if it is not already active.
4 Select the required Corridor Mode setting:
• Off
• -90°
• +90°
The camera requires a reboot to set the new corridor mode. Once rebooted the video pane
updates to display the new settings.
- End -
Procedure 25 Adjust Camera Focus / Zoom
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.
3 Select to start the video stream if it is not already active.
4 Use the arrows to manually configure the focus and the slider bar to adjust zoom settings
until the image in clear. The video pane updates to display the new settings.
- End -
Procedure 26 Adjust Camera Focus using OneTouch Autofocus
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.