Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
36 8200-2007-08 A0
3 Select to start the video stream if it is not already active.
4 Select the One Touch button. The camera refocuses to the zoom level selected for the
image. The video pane updates to display the new settings.
- End -
Procedure 27 Configure Exposure Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.
3 Select to start the video stream if it is not already active.
4 Select the Exposure Profiles from the drop-down menu:
See Exposure Profile descriptions below:
Demo
• Bitrate controller VBR
• Quality highest
• Set max exposure and min exposure allowed
• Set max gain value allowed
• Auto exposure selects shutter speed (between min and max exposure
values) and gain (between 0db and max gain selection) to adjust expos-
ure if light level or scene changes
• Use case: Out of the box configuration for optimal video and image
quality
Note:
• Demo Mode VBR Highest is the default out of the box (or after a fact-
ory reset)
• Exposure default buttons will default Exposure profile to Auto (it will not
apply any bitrate changes)
• Demo mode will only revert back to VBR Highest on a Factory reset
• Demo mode to other values will change the bitrate to CVBR Max
Bitrate 8000
• Other to Demo does not change the bitrate under any circumstance
• Other to Other does not change the bitrate under any circumstance
• When Exposure profiles sets new bitrate values, they will not auto-
matically restart active stream to update to the new settings. Manual
restart is required.
Auto
• Set camera Bitrate controller to CVBR
• Set Max Bitrate to 8000
• Set any iris position