Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 37
• Set Max exposure and Min exposure allowed
• Set max gain value allowed
• Auto Exposure selects shutter speed (between min and max exposure
values) and gain (between 0db and max gain selection) to adjust expos-
ure if light level or scene changes
• Use case: To select a required depth of focus.. Selecting a high iris
value will give a larger depth of focus so that objects close to and far
from the camera can be in focus at the same time. Caution: With a high
iris value the camera is not able to produce a bright image in very low
light levels
Outdoor
• Set camera Bitrate controller to CVBR
• Set Max Bitrate to 8000
• Set max gain allowed
• Set max exposure allowed
• Set min exposure allowed
• Auto Exposure selects shutter speed (between min and max exposure
values), gain (between 0db and max gain selection) and iris position to
adjust exposure if light level or scene changes
• Iris operation tailored to give larger depth of focus if conditions are
bright enough
• Use case: Outdoor operation with or without IR illumination enabled
Note:
• Demo Mode VBR Highest is the default out of the box (or after a fact-
ory reset)
• Exposure default buttons will default Exposure profile to Auto (it will not
apply any bitrate changes)
• Demo mode will only revert back to VBR Highest on a Factory reset
• Demo mode to other values will change the bitrate to CVBR Max
Bitrate 8000
• Other to Demo does not change the bitrate under any circumstance
• Other to Other does not change the bitrate under any circumstance
• When Exposure profiles sets new bitrate values, they will not auto-
matically restart active stream to update to the new settings. Manual
restart is required.
Indoor
• Set camera Bitrate controller to CVBR
• Set Max Bitrate to 8000
• Set max gain allowed
• Set max exposure allowed
• Set min exposure allowed