Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
40 8200-2007-08 A0
12 Select the Manual Gain (dB) from the drop-down menu.
The default setting is 0db.
13 Select the Frequency radio button for either 50Hz or 60Hz.
The default setting is 60Hz.
14 Select or clear the check box for Flickerless Mode.
This feature is not selected by default.
• When you select Flickerless Mode, the minimum and maximum
exposure times are locked to 1/100 and 1/50 respectively (PAL) or
1/120 and 1/60 respectively (NTSC). This applies to all cameras ref-
erenced in this guide.
- End -
Procedure 28 Restore Exposure Defaults
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.
3 Select to start the video stream if it is not already active.
4 Select Exposure Defaults to restore the default settings.
- End -
Picture Additional
Configure Wide Dynamic Range, Day Night Mode, Picture Adjustments and White Balance.
Wide Dynamic Range
Wide Dynamic Range (WDR) is a feature that supports the viewing of high contrast scenes that
include both bright and low light areas in the same field of view (FOV).
WDR Level allows you to adjust the WDR level to favor a underexposed or overexposed image. By
selecting the lower end of the control, the image is underexposed which provides more detail in areas
of bright but less details in areas of darkness. Selecting the higher end of the control, the image is
overexposed which provides more detail in the dark areas but less details in the bright areas.
A typical use for this feature would be viewing a scene with both indoor and outdoor lighting
conditions simultaneously, for example, in a warehouse area with an open bay door.
Procedure 29 Disable/Enable Wide Dynamic Range (WDR)
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional tab from the Basic Configuration menu.
3 Select the required WDR from the drop-down list:
• Off: WDR is off
• Smart WDR: Digital wide dynamic range, enhancing detail in darker
areas