Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
42 8200-2007-08 A0
Day Night Mode
The dome provides a black-and-white (B/W) mode to improve camera performance when the light
level falls below certain thresholds. This allows clear images to be obtained under low-light
conditions.
Procedure 31 Configure Day Night Mode
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional from the Basic Configuration menu.
3 Select a Day Night Mode setting from the drop-down menu:
• Forced Color - enable full-time color mode.
• Forced B&W - enable full-time black and white mode.
• Auto Low - camera will adjust between BW and Color depending on
light levels.
• Auto Mid - camera give a good balance of Color and BW depending on
the scene.
• Auto High - increases the chance of switching to BWmode as light
levels drop.
• Manual - a slider bar will display, the user can adjust the setting to suit
the environment.
The default setting is 'Auto Mid'.
- End -
Picture Adjustment
Adjust brightness, contrast, saturation, hue and sharpness of the image displayed on the video pane.
Procedure 32 Adjust the Brightness, Contrast, Saturation, Hue and
Sharpness
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional tab from the Basic Configuration menu.
3 Select to start the video stream if it is not already active.
The video pane will display the current camera view.
4 Use the slider bars to adjust:
• Brightness
• Contrast
• Saturation
• Hue
• Sharpness
The values range from 1% to 100%. The video pane updates to display the new settings.