Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 43
- End -
Procedure 33 Restore Picture Balance Defaults
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Settings tab from the Basic Configuration menu.
3 Select Defaults to restore the default settings.
The default values are:
• Brightness: 50%
• Contrast: 50%
• Saturation: 50%
• Hue:50%
• Sharpness: 50%
- End -
White Balance
White balance, the ability to keep whites looking white, is normally compensated for automatically
using the default Auto White Balance setting.
Manual White Balance is available when specific color temperature settings want to be set and
preserved. This can be done using the red and blue slider adjustments set for optimal viewing.
Procedure 34 Configure Auto White Balance
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional tab from the Basic Configuration menu.
3 Select to start the video stream if it is not already active.
The video pane displays the current camera view.
4 Select the required White Balance from the drop-down menu:
• Auto Normal: Suitable for a normal range of lighting conditions
• Manual: Adjustable red and blue balance sliders
• Auto Wide: Suitable for a wider than normal range of lighting con-
ditions
The default setting is ‘Auto Normal’.
- End -
Procedure 35 Manually Select White Balance
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional tab from the Basic Configuration menu.