Installation Guide

44 8200-2007-08 A0
3 Select to start the video stream if it is not already active.
The video pane displays the current camera view.
4 Select Manual from the White Balance drop-down menu.
The Red and Blue slider bars display.
5 Use the slider bars to adjust the Red and Blue balance.
The live video pane updates to display the new settings.
The red and blue values range from 1% to 100%.
If you change the configuration to Manual, the slider bar reads the real-time setting of the
FOV.
- End -
Date Time
You can change the camera name and set the date and time.
Procedure 36 Change the Camera Name
Step Action
1 Select Setup on the Web User Interface banner.
2 Select the Date Time tab in the Basic Configuration menu.
3 Enter the name of the camera in the Camera Friendly Name text box.
- End -
Procedure 37 Configuring the Date and Time
Step Action
4 Select Setup on the Web User Interface banner to display the setup menus.
5 Select the Date Time tab from the Basic Configuration menu.
6 Select the Time 24-hour check box to enable the 24-hour clock.
Or
Deselect the Time 24-hour check box to enable the 12-hour clock.
The default setting is ‘24-hour’.
7 Select the Date Display Format from the drop-down menu:
• DD/MM/YYYY
• MM/DD/YYYY
• YYYY/MM/DD
The default setting is ‘YYYY/MM/DD’.
8 Select the Time Zone from the drop-down menu.
The default setting is ‘(GMT-05:00) Eastern Time (US & Canada)
9 Select the Set Time setting by selecting the radio buttons:
• Manually