Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
46 8200-2007-08 A0
Procedure 40 Display or Hide the Camera Time
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the OSD tab in the Basic Configuration menu.
3 In the Date Time section, select the Enable check box to display the camera name in the
OSD.
OR
In the Date Time section, clear the Enable check box to hide the camera name in the OSD.
The default setting is ‘Disabled’.
- End -
Procedure 41 Display or Hide the User Defined
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the OSD tab in the Basic Configuration menu.
3 In the User Defined section, select the Enable check box to display the camera name in
the OSD.
OR
In the User Defined section, clear the Enable check box to hide the camera name in the
OSD.
The default setting is ‘Disabled’.
4 Select a Location from the drop-down menu.
5 Enter a name in the Name field.
The OSD User Defined fields must comply with the following validation criteria:
• 0 - 24 characters
• Cannot begin or end with:
• . (dot)
• - (hyphen)
• _ (underscore)
• \ (backslash)
• " (quotes)
- End -