Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 50
Image Profiles
The Image Profiles feature enables users to capture, export and restore selected picture settings
configurations from a previously saved data file. The data file can be saved to a specified location
and used to restore the camera picture settings configuration.
Lens Calibration
Use the lens calibration process to recover focus and zoom after motor stalling has occurred. Motor
step stalling is rare, but it can occur during shipping or through mishandling of the camera. If the One
Touch focus at Wide or Tele is not working through the zoom range, the camera requires lens
calibration. The lens calibration tool uses infinity focus curves to align the camera lens and correct
problems focusing at Wide or Tele.
Procedure 44 Configure Orientation Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select the required Orientation setting:
• Mirror
• Flip
Mirror and Flip settings are not selected by default. The video pane updates to display the
new settings.
Note:When wall mounting the camera you should select Flip to correct the lens
orientation.
- End -
Corridor Mode
Provides a better perspective when viewing a long corridor.
Procedure 45 Configure Corridor Mode Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select the Play button to start the video stream if it is not already active.
4 Select the required Corridor Mode setting:
• Off
• -90°
• +90°
The camera requires a reboot to set the new corridor mode. Once rebooted the video pane
updates to display the new settings.
- End -