Installation Guide

51 8200-2007-08 A0
Procedure 46 Adjust Camera Focus / Zoom
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select to start the video stream if it is not already active.
4 Use the arrows to manually configure the focus and the slider bar to adjust zoom settings
until the image in clear. The video pane updates to display the new settings.
- End -
Procedure 47 Adjust Camera Focus using OneTouch Autofocus
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select to start the video stream if it is not already active.
4 Select the One Touch button. The camera refocuses to the zoom level selected for the
image. The video pane updates to display the new settings.
- End -
Procedure 48 Configure Exposure Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select to start the video stream if it is not already active.
4 Select the Exposure Profiles from the drop-down menu:
See Exposure Profile descriptions below:
Demo
Bitrate controller VBR
Quality highest
Set max exposure and min exposure allowed
Set max gain value allowed
Auto exposure selects shutter speed (between min and max exposure
values) and gain (between 0db and max gain selection) to adjust expos-
ure if light level or scene changes
Use case: Out of the box configuration for optimal video and image
quality
Note: