Installation Guide

59 8200-2007-08 A0
Procedure 55 Configure Auto White Balance
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select the Picture Additional tab.
4 Select to start the video stream if it is not already active.
The video pane displays the current camera view.
5 Select the required White Balance from the drop-down menu:
• Auto Normal: Suitable for a normal range of lighting conditions
• Manual: Adjustable red and blue balance sliders
• Auto Wide: Suitable for a wider than normal range of lighting con-
ditions
The default setting is ‘Auto Normal’.
- End -
Procedure 56 Manually Select White Balance
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select the Picture Additional tab.
4 Select to start the video stream if it is not already active.
The video pane displays the current camera view.
5 Select Manual from the White Balance drop-down menu.
The Red and Blue slider bars display.
6 Use the slider bars to adjust the Red and Blue balance.
The live video pane updates to display the new settings.
The red and blue values range from 1% to 100%.
If you change the configuration to Manual, the slider bar reads the real-time setting of the
FOV.
- End -
Image Profiles
The Image Profiles feature enables users to capture, export and restore selected picture settings
configurations from a previously saved data file. The data file can be saved to a specified location
and used to restore the camera picture settings configuration.