Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 60
Procedure 57 Capturing a profile
Step Action
1 Select Setup on the Web Interface Banner to display the setup menus.
2 Select Picture Settings in the Video menu.
3 Select the Image Profiles tab.
4 Configure the required settings.
Note:Frequency and Wide Dynamic Range settings are not supported.
5 Select the Image Profiles tab from the Picture Settings menu.
6 Select Save in the Capture Profile section. The user is prompted to choose a location to
save the file.
- End -
Procedure 58 Uploading a profile
Step Action
1 Select Setup on the Web Interface Banner to display the setup menus.
2 Select the Picture Settings in the Video menu.
3 Select the Image Profiles tab.
4 Select Browse in the Upload Profile section and navigate to saved data file.
5 Select Upload.
6 If the upload is successful, the profile is automatically applied to the camera and will be
visible in the Image Profiles drop down list.
- End -
Procedure 59 Applying a profile
Step Action
1 Select Setup on the Web Interface Banner to display the setup menus.
2 Select the Picture Settings in the Video menu.
3 Select the Image Profiles tab.
4 Select uploaded profile from the Image Profiles drop down menu.
5 Select Set.
- End -
Procedure 60 Deleting a profile
Step Action
1 Select Setup on the Web Interface Banner to display the setup menus.
2 Select the Picture Settings in the Video menu.
3 Select the Image Profiles tab.