Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
63 8200-2007-08 A0
The default setting is ‘Normal’.
- End -
Procedure 65 Display or Hide the Camera Name
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Date / Time / OSD from the Video menu.
3 Select the OSD tab.
4 In the Camera Name section, select the Enable check box to display the camera name in
the OSD.
OR
In the Camera Name section, clear the Enable check box to hide the camera name in the
OSD.
The default setting is ‘Disabled’.
- End -
Procedure 66 Display or Hide the Camera Time
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Date / Time / OSD from the Video menu.
3 Select the OSD tab.
4 In the Date Time section, select the Enable check box to display the camera name in the
OSD.
OR
In the Date Time section, clear the Enable check box to hide the camera name in the OSD.
The default setting is ‘Disabled’.
- End -
Procedure 67 Display or Hide the User Defined
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Date / Time / OSD from the Video menu.
3 Select the OSD tab.
4 In the User Defined section, select the Enable check box to display the camera name in
the OSD.
OR
In the User Defined section, clear the Enable check box to hide the camera name in the
OSD.
The default setting is ‘Disabled’.