Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 67
Procedure 71 Configure SMTP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the Enable SMTP check box to enable SMTP.
Fields on the tab become available for entry of information.
OR
Clear the Enable SMTP check box to disable SMTP.
The default setting is 'Disabled'.
Note:When in Enhanced Security mode, enabling SMTP requires the admin
account password.
4 Enter the IP Address of the mail server in the Mail Server text box.
5 Enter the server port in the Server Port text box.
The default setting is ‘25’.
6 Enter the from email address in the From Address text box.
7 Enter the email address to send email alerts to in the Send Email to text box.
8 Select the Use authentication to log on to server check box to allow authentication
details to be entered.
OR
Clear the Use authentication to log on to server to disable authentication.
The default setting is ‘Disabled’.
9 If ‘Use authentication to log on to server’ check box has been selected:
a Enter the username for the SMTP account in the Username text box.
b Enter the password for the SMTP account in the Password text box.
- End -