Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
68 8200-2007-08 A0
Test SMTP Settings
Test that the SMTP settings are configured correctly.
Procedure 72 Test the SMTP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select Test to send a sample email to the designated email id.
- End -
FTP
Configure the FTP settings for the FTP server. This is required to send video files from triggered
analytic alerts. FTP must be configured to enable FTP video alerts when using analytics. You can
configure FTP settings through the Network menu.
Procedure 73 Configure FTP Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the FTP tab.
4 Select the Enable FTP check box to enable FTP.
OR
Clear the Enable FTP check box to disable FTP.
The default setting is ‘Enabled’.
5 If required, select the Secure FTP checkbox.
The default setting is ‘Disabled’.
Note:When in Enhanced Security mode, enabling FTP requires the admin account
password.
6 Enter the IP address of the FTP Server in the FTP Server text box.
7 Enter the FTP username in the Username text box.
8 Enter the FTP password in the Password text box.
9 Enter the FTP upload path in the Upload Path text box.
Note:
Refer Test the SMTP Settings on page 68 to confirm that the FTP settings are working as
expected.
- End -