Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 75
- End -
Procedure 86 Delete a Region of Interest
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
The ROI tab is displays.
3 Select to delete the corresponding region of interest.
- End -
Face Detection
Face Detection works by detecting human faces and ignoring other objects, such as trees or
buildings. This feature can be enabled or disabled and the required face orientation selected.
Note:Face detection is subject to a free licence reques in order to enable the feature.
Procedure 87 Enable / Disable Face Detection
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the Face Detection tab.
4 To enable Face Detection on the camera:
a Select the Enable Face Detection checkbox.
b Select the Highlight Faces checkbox to enable
OR
Deselect the Highlight Faces checkbox to disable.
c Select the Enhances Faces checkbox to enable.
OR
Deselect the Enhances Faces checkbox to disable.
d Select the Face Orientation from the drop-down menu.
• Up
• Left
• Right
OR
Deselect the Enable Face Detection checkbox to disable Face Detection on the camera.
5 Select the required pre-configured action to be taken if a face is detected from the Action
drop down menu.
- End -