Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 77
5 Select the zone for detection in the Motion zone drop-down list.
6 Select the Enable motion zone check box to enable the zone for motion detection.
7 Select Edit in the Region configuration field.
8 Use the drawing tools on the Motion Detection Configuration Pane to draw the region of
interest on the pane. Multiple selections can be made.
9 Select the sensitivity from the Sensitivity drop-down menu:
• Highest
• High
• Medium
• Low
• Lowest
10 Select the fault action from the Action drop-down menu.
This fault action activates when motion is detected in the selected region of interest.
Refer to the Create a Fault Action procedure if a fault action has not yet been defined.
11 Select Apply to save the changes.
- End -
Enable or Disable a Motion Detection Alert
Motion detection can be turned on and turned off when required.
Procedure 89 Enable or Disable a Motion Detection Alert
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the Motion Detection tab.
The Motion Detection Configuration pane displays.
4 Select the Enable motion detection checkbox to enable Motion Detection on the camera.
OR
Clear the Enable motion detection checkbox to disable Motion Detection on the camera.
5 Select Apply to save.
- End -
Video Intelligence
Video Intelligence Camera Alarms
After enabling Video Intelligence on a camera, you can define alarm rules that trigger an event.
Each camera can have any number of independent Video Intelligence rules. In each rule you can
define the areas in the cameras view that you want to monitor. You can name each alarm rule. It is
best to use descriptive names like ‘Back Door’ or ‘Conference Room’, as these names make it easier