Installation Guide
Table Of Contents
- Overview
- Illustra PG4 Series 2MP, 4MP and 8MP Indoor / Outdoor Dome Cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: Using Media Player to View RTSP Streaming
- Appendix B: Stream Tables
- Appendix C:Technical Specifications
- End User License Agreement (EULA)
Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 83
highlighted via a different color (perimeter area = green, protected area = yellow, min-
imum object size = purple, and maximum object size = red).
b Linger Time- The minimum amount of time an object lingers before the alarm is
triggered.
Crowd Formation
a Overlap (%) - The amount of detected object that must be in the region of interest to be
considered for determining the crowd size.
b Minimum Crowd Size - The minimum number of people that must be present to generate
an alarm. This can be between 2-50 people.
Exit
a Overlap (%) - The amount of detected object that must be in the region of interest when
the object leaves the scene for an alarm to be triggered. The object must appear in the
scene while being outside the region of interest by the same amount. For best results
select a higher overlap setting.
Enter
a Overlap (%) - The amount of detected object that must be in the region of interest when
it first appears in the camera view. The object must leave the region of interest by the
same amount before an alarm is triggered. For best results select a higher overlap set-
ting.
- End -
Procedure 92 Enable/Disable an Analytics Rule
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the Video Intelligence tab.
4 From the Analytics Rules table, select the check box of the target Analytics Rule to enable
the analytics rule
OR
Deselect the check box of the target Analytics Rule to disable the analytics rule.
- End -
Procedure 93 Edit an Analytics Rule
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the Video Intelligence tab.
4 From the Analytics Rules table, select the edit icon across from the analytics rule that
you want to edit.
5 Edit the settings in the Rule Definition until you are happy with your changes.
6 Select Save to save your changes.