Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 85
Procedure 96 Creating a Analytic Rule in AI Object Classification
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the AI Object Classification tab.
4 Select the Enable AI Object Classification check box to enable AI Object Classification
on the camera.
5 Select New Rule.
6 Type a Rule Name for your rule definition in the field provided.
7 Select a fault action from the Action drop-down menu.
This fault action is activated when the parameters of the analytics rule are met.
8 Select a rule type from the Rule Type drop-down menu:
Object Detection - Used to detect objects moving into a region of interest.
This alarm is similar to a motion alarm, but only detects objects the first time
they enter the region of interest. A separate event is generated for each object that
enters the region, even if the objects move into the region at the same time, unlike motion
detection that generates one event.
Linger - Used to detect objects loitering in a region of interest. An object is lingering if it
remains in the region of interest. The minimum amount of time an object must linger
before being included in the results can be defined and you can draw a region in the area
where you want to detect objects lingering. Use a higher Overlap setting to avoid detecting
objects lingering nearby.
Dwell - Used to detect objects lagging or tarrying in a region of interest. An object is
dwelling if it is mostly stationary. The minimum amount of time an object must dwell
before being included in the results can be defined. Draw a region in the area where you
want to detect objects dwelling. Use a higher Overlap setting to avoid detecting objects
dwelling nearby.
Perimeter - Used to detect when objects enter a protected area through a perimeter
area, or detect when an object is in the perimeter area for too long. Draw regions of
interest to define the perimeter area and the protected area.
9 Select Object type from the Object Class drop down
10 Use the Overlap slider bar to increase or decrease the percentage of overlap.
11 Select Save to save your changes.
The rule name and type that you have created appears in the Analytics Rules table.
Note:When rule type is selected , extra configuration items appear for some rule
types. See the section on Video Intelligence above for information on the extra
configuration options for each rule type.