Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 87
Procedure 98 Edit an Analytics Rule
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the AI Object Classification tab.
4 From the Analytics Rules table, select the edit icon across from the analytics rule that you
want to edit.
5 Edit the settings in the Rule Definition until you are happy with your changes.
6 Select Save to save your changes.
- End -
Procedure 99 Delete an Analytics Rule
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the AI Object Classification tab.
4 From the Analytics Rules table, select the delete icon across from the analytics rule that
you want to delete.
5 Select OK when you are asked to confirm your action.
6 Select Save to save your changes.
- End -
Blur Detection
The camera generates an alarm and then takes the action you specified during configuration when
the Blur Detection feature is enabled and the camera detects incidents that make the video image
blur, such as: redirection, blocking, or defocusing.
When you enable Blur detection, it has a polling period of roughly 1 minute.
A Blur Detection start fault is raised when blur has been detected at 60 successive polling periods of
1 second (up to 1 minute).
Periodic Events
The camera can generate a scheduled event with an associated event action. The event can be set
to trigger between 5 to 60 minute interval. You can name the event, enable or disable it, set the time
and associate the event action.
Procedure 100 Configure a Periodic Event
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Periodic Events from the Events and Actions menu.