Installation Guide

88 8200-2007-08 A0
The Periodic Events tab displays.
3 Enter the name of the periodic event in the Name text box.
4 Select the Enabled check box to enable the Periodic Event.
OR
Clear the Enabled check box to disable the Periodic Event.
5 Select the Periodic Time (min) drop-down menu to select a value for the periodic time.
6 Select the Action drop-down menu to select a fault action.
- End -
Event Logs
Event Log
When events are triggered the resulting alarms are displayed in the Event Log with the following
information:
• No. - details the event index.
• Event - this is listed as ‘MotionDetected’.
• Date created - the time and date when the motion detection was triggered.
• Component - internal software component that raised the fault for a motion detection alert.
This is listed as ANALYTICS.
• Severity - indicates how serious the fault is. Motion detection alerts list as ‘Warning’.
• Detail - extra information that supplements the motion detection alert.
• Delete - remove the motion detection alert notification from the fault table.
Procedure 101 Display Event Log
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Logs from the Events and Actions menu. The Event Log tab displays.
Triggered motion detection alerts display.
- End -
Procedure 102 Delete Current Events
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Logs from the Event and Actions menu. The Event Logtab displays.
3 Select the corresponding Delete check box to mark the motion detection alert for deletion.
OR
Clear the corresponding Delete check box to keep the motion detection alert.
Note:You can select the Select All check box to mark all motion detection alerts
displayed in the list for deletion.
4 Select Delete to delete the selected motion detection alerts.