Operator's Manual Camera Dome RAS915/RAS916/RAS917
SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY 8200-0184-09, REV. A
OPERATOR’S MANUAL SUPPLEMENT
2 of 13
Quick Set Menu
The Quick Set Menu provides easy access to
commonly used SpeedDome Ultra VII features
when used with compatible controllers. This allows
you to change or activate features without starting
the dome configuration menu. The options on the
Quick Set Menu differ depending on the dome
type. See Figure 1 and Figure 2 for examples of
the different menus.
Figure 1: 22x Camera Dome Quick Set Menu
0 TOGGLE QUICK SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS/AUTO FOCUS
3 FLIP
4 PEEL PATTERN
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFORMATION
Figure 2: Day/Night Camera Dome Quick Set
Menu (2 screens)
0 TOGGLE QUICK SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS/AUTO FOCUS
3 FLIP
4 PEEL PATTERN
10 NIGHT MODE
11 DAY MODE
12 AUTO DAY/NIGHT MODE
13 WDR ON
14 WDR OFF
FOCUS FAR = next page
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFORMATION
FOCUS NEAR = previous page
To access a feature on the menu, enter the
number and press the Quick Set button (varies by
controller). Table 1 provides a description of the
available options.
Table 1: Quick Set Menu Options
Command Description
0+Quick Set Toggle Quick Set Menu: Toggles
between displaying and hiding
the quick set menu.
1+Quick Set Dome Config Menu: Displays the
SpeedDome Ultra configuration
menu.
2+Quick Set Auto Iris/Auto Focus: Resumes
Auto Focus/Auto Iris mode.
3+Quick Set Flip: Rotates the SpeedDome
180° from its current pointing
direction. This is the same as
pressing the Flip button on
compatible controllers.
4+Quick Set Peel Pattern: Runs the default
Apple Peel Pattern. This is the
same as pressing the Peel button
on compatible controllers.
10+Quick Set* Night Mode: Sets the dome IR
mode setting to ON. The dome
switches to full-time black-and-
white (B/W) mode.
11+Quick Set* Day Mode: Sets the dome IR
mode setting to OFF. The dome
switches to full-time color mode.
12+Quick Set* Auto Day/Night Mode: Resumes
the most recently selected
automatic IR mode setting.
• Auto High: B/W mode activates
~30 lux.
• Auto Mid: B/W mode activates
~3 lux.
• Auto Low: B/W mode activates
~ 0.5 lux
13+Quick Set* WDR On: Enables Wide Dynamic
Range (WDR). Use this setting
when both bright and low light
areas need to be viewed
simultaneously.
*
Menu items 10-14 are available on Day/Night
domes only.