Specifications

SPEEDDOME ULTRA VII CAMERA DOME INSTALLATION AND SERVICE GUIDE (8200-0184-01, REV. A1)
19 of 41
11. Connect the housing and eyeball assembly to
the base (Figure 18).
a. Align the dimple on the cap of the dome with
the rib on the mounting base.
b. Mate the housing and eyeball assembly to
the base and turn it clockwise until you hear
a click.
12. Wait a few seconds for dome to begin its
homing routine. The homing routine indicates
that the address was placed into the dome
memory and that the dome is ready for
programming.
Figure 18. Connecting housing and eyeball
assembly to base
L
A
T
C
H